You can move the architect on the TAD interface. Following are the various methods to move the architect:

• Moving the architect approximately: Move the pointer over the architect. Press and drag the left mouse button to the place where you want to move the architect.
• Moving the architect precisely: You can move the architect on measured distance using the following ways:

1. Enter the the distance of the architect from the X and Y co-ordinates in the command text edit box. For example, 5[Space]4 [Enter]. You must ensure to add a space between the X and Y co-ordinate values.
2. Enter the distance of the architect from the first helper in the command text edit box and press Enter. The architect moves along the direction obtained by joining the architect with the first helper.
3. Enter distance from the first helper and angle from the horizontal anticlockwise direction in the command edit text box. For example, 5[Space]<45 [Enter]. In this example, 5 is the unit of distance from the first helper and 45 is the angle.

• Changing the step size of the architect: You can move the architect based on the step size using the arrow keys.To change the step size of the architect, enter the step size in the command edit text box, and press Enter. You can re-size the architect by drawing a rectangle on the site using the mouse. Re-sizing the architect also changes the step size.