Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
act3dopts [2018/02/20 11:01]
admin
act3dopts [2019/04/12 21:12] (current)
admin
Line 1: Line 1:
-3D options dialog+====3D options dialog==== 
 + 
 +This can fine-tune the way the 3D draft view would work 
 + 
 +One very useful setting here is the //yon plane// value. In certain TAD files; you would notice that you will not see anything being displayed properly in the draft view within TAD . You would see only the sky and the ground. 
 + 
 +If you are sure that the //​Location//​ and the //Lookat// objects of the view class are correctly positioned; and values for their height and level are also correct; then most likely the overall extents of the model may be so large that TAD cannot process the display 
 + 
 +In such a case change the //Yon plane// setting to something large; say 1000 and try again!
  
  

Press F1 inside the application to read context-sensitive help directly in the application itself
Last modified: le 2019/04/12 21:12