Differences

This shows you the differences between two versions of the page.

--- act3dopts [2018/02/20 12:01] – admin
+++ act3dopts [2019/04/12 23:12] – admin
@@ Line 1: / Line 1: @@
-D options dialog
+====3D options dialog====
+This can fine-tune the way the 3D draft view would work
+One very useful setting here is the //yon plane// value. In certain TAD files; you would notice that you will not see anything being displayed properly in the draft view within TAD . You would see only the sky and the ground.
+If you are sure that the //Location// and the //Lookat// objects of the view class are correctly positioned; and values for their height and level are also correct; then most likely the overall extents of the model may be so large that TAD cannot process the display
+In such a case change the //Yon plane// setting to something large; say 1000 and try again!

Press F1 inside the application to read context-sensitive help directly in the application itself
← ∈